SIM7600G-H 4G HAT (B) for Raspberry Pi , LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band Connected via pogo pin or Micro - USB connector Dedicated pogo pin for Raspberry Pi Zero/Zero W Micro - USB connector for other Raspberry Pi boards or PC Incorporates SIM7600G-H global band 4G module, compatible with 2G/3G/4G network with global support USB HUB connector for other Raspberry Pi boards or PC, providing USB extension and 4G network access Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, Bei - Dou, Glonass, GALILEO, QZSS, LBS base station positioning SIM card slot, supports 1.8V/3V SIM card Onboard audio jack and audio decoder for making telephone call 2x LED indicators, easy to monitor the operating status Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT Frequency band LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66 LTE-TDD: B34/B38/B39/B40/B41 3G: UMTS/HSDPA/HSPA+: B1/B2/B4/B5/B6/B8/B19 2G: GSM/GPRS/EDGE: 850/900/1800/1900 MHz GNSS Satellite systems: GPS/Beidou/GLONASS/GALILEO/QZSS Receiver type: 16-channel, C/A Code Sensitivity: -159 d - Bm (GPS) / -158 d - Bm (GLONASS) / TBD (Bei - Dou), Cold starts: -148 d - Bm T ime-To-First-Fix (open air): Cold starts: <35s, Hot starts: <1s SMS and Audio SMS Supported types: MT, MO, CB, Text, PDU Audio feature: Supports echo cancellation Supports noise reduction Other Power supply: 5V Operating temperature: -30°C ~ 80°C Storage temperature: -45°C ~ 90°C Dimensions: 65.00 x 32.00mm Suitable for Raspberry Pi / PC Dedicated pogo pin for connecting with Raspberry Pi Zero/Zero W without extra USB cable - General purpose Micro - USB connector for other Raspberry Pi boards or PC Global band 4G / 3G / 2G support up to 50Mbps uplink and 150Mbps downlink for 4G network * * stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc. USB HUB feature onboard USB HUB chip with USB2.0/1.1 compliant, providing 2x USB-A connector and 1x USB solder pad GNSS positioning Supports GPS, Bei - Dou, Glonass, GALILEO, QZSS, LBS base station positioning Telephone call & SMS Support Making telephone call or sending SMS by AT commands, with onboard audio jack What's on board SIM7600G-H FE1.1S USB HUB chip NAU8810 audio decoder MP1482 power chip RT9193-33 voltage translator USB HUB input D+/D- pogo pin: for Raspberry Pi Zero/Zero WMicro - USB connector: for other Raspberry Pi boards or PC Pogo pin power supply 5V: connects to 5V pin of Zero/Zero W, up to 2A current - GND: connects to GND pin of Zero/Zero W USB extended ports USB1~USB2: USB-A connectors